2014年11月25日星期二

Zoomlion National Engineering Research Center for concrete machinery through the acceptance

Recently, Hunan Changsha High-tech enterprises in the zone by Zoomlion concrete machinery Academia Sinica joint company to carry out the Combination of special projects, "National Engineering Research Center of concrete machinery", successfully passed acceptance.

Provincial Science and Technology Department inspection team members to do the high-tech, business leaders at the provincial Department of Finance, and China Construction Machinery Industry Association, China South Locomotive and National Engineering Research Center, Hunan University, Central South University, Hunan Chu CPA experts to visit to understand the national Center for facilities construction, participants will review the project acceptance.

Director of National Engineering Research Center of concrete machinery Wubin Xing task completion of the project objectives, operational performance, typical cases and future year development plan for a detailed report. Expert Group under the project contract construction plans, targets and other relevant requirements, carefully review the acceptance of materials, carefully listened to the report, the question and answering questions, comments and suggestions made acceptance.

The Group believes that the national concrete mechanical engineering technology research center of technological innovation and industrialization ability, organizational integrity, runs well, has a higher opening and service capabilities, achievements, radiation, strong demonstration of capacity, with good prospects for development unanimously agreed to by the project acceptance.

By acceptance of this project, marking the National Engineering Research Center of concrete machinery started to achieve scientific and technological achievements and spread radiation across the concrete machinery and its related fields.

They are directly from the United States

Not long after an old Chinese woman came back to China from her visit to her daughter in the States, she went to a city bank to deposit the US dollars her daughter gave her. At the bank counter, the clerk checked each note carefully to see if the money was real. It made the old lady out of patience.
At last she could not hold any more, uttering. "Trust me, Sir, and trust the money. They are real US dollars. They are directly from America."

2014年11月24日星期一

Concrete coping with excess capacity upgrade

Statistics show that in 2013, the world's cement production of about 40 million tons, accounting for 79.4% of total production in Asia. Among them, China 2.4 billion tons, accounting for 58% of global output. China as the main battlefield of concrete machinery, at present, the domestic concrete machinery enterprises are facing more than 90% overcapacity, plant and equipment, personnel and other larger burden predicament.

     In order to avoid overcapacity caused by vicious competition, relevant industry enterprises to increase energy conservation and technological innovation, in order to resolve the crisis of overproduction.

     From the point of view of energy saving, first advocated the use of high performance concrete. Although the high cost of their applications, but the strength is greatly improved, the amount of cement dropped, the same intensity volume is much lower, which is currently one of the important methods of energy conservation. Second, through governance seriously overloaded mixer to achieve emission reduction targets. According to the Beijing Municipal Environmental Protection Bureau measuring, PM2.5 a truck is 90 times the normal car, if overloaded transport, PM2.5 may reach 200 percent. According to statistics of China Construction Machinery Industry Association, the National from 2004 to 2013 decade, ready mix concrete holdings of 235,469 units, which is equivalent to the amount of two thousand million Beijing has five vehicles, environmental problems caused by very serious . Third, the new industry October 1, 2014 implementation of the standard "green ready-mixed concrete production and management of technological processes" is also a form of corporate upgrading and updating. The standard control requirements include: raw materials, production of waste water waste pulp, waste concrete, noise, dust production, transportation management, occupational health and safety. This standard not only for manufacturers mixing station is required, but also on the use of concrete manufacturer's required, the difficulty is quite large, so our industry is a rigorous test, if it is not a point of order in the first three requirements specified in this business is at stake, you should pay close attention. Through the implementation of this standard, companies should as soon as possible in accordance with national standards of production mixing truck, in order to reduce emissions.

     From the perspective of innovation, we can boldly imagine concrete machinery innovations from the following aspects: In order to ensure that each time the tank is not the lack of cement, or cement should cement screw conveyor, powder plus sensor or a weighing mechanism chips, once missing scales, the device will alarm, no concrete avoid major accidents; the cement silo and dust to prevent roof collapse (hoisting) pressure sensing chip installed in each bearing lubricator or stepping on An axis sensor chip to prevent bearing damage; angle sensor is installed on the pump, torque sensors installed on curved arm, and should use digital sensor, so many new technologies can be applied, such as: micro-control technology, remote control technology , voice technology, light control technology. If you choose to use these technologies have on the concrete machinery products, will get good benefits.

     In terms of innovation, the application of concrete remote vehicle scheduling management system is concrete machinery upgrading main content. The system uses advanced concrete vehicle (mixers, pumps, automotive pumps, etc.) information management and computer data processing systems, combined with advanced GPS global positioning (Compass can) technology, GSM global mobile communication technology, GIS geographic information worldwide processing system. Not only can dynamically query the exact vehicle location, speed, direction of travel or other information in a static state, but also to accurately identify the variety of working conditions (on standby duty, heavy trucks, unloading, empty, maintenance), the completion of all users vehicle scheduling and management.

     In addition, Sand breakthrough technology bottleneck is imperative. Currently, despite the South Road Machine, Zoomlion, XCMG existing products supplied to the market, but the technology compared with other countries, there is a gap, but only allowed to sell to overseas Chinese, technically absolute blockade . It is understood that China in 2013 amounted to 10 billion tons of sand, the output value of 300 billion, experts estimate that by 2015 the global mechanism with a capacity of 48.3 billion tons of sand, sand China, amounted to 20 billion tons needed. Not only for construction, roads, railways need to use sand, including shale oil also need to use sand. US hit an oil well use 700 tons of sand, can be expected in the future the amount of sand is considerable.

     In concrete machinery products in the process of upgrading, will be to encourage the participation of SMEs, such as fittings, establish strategic partnership to jointly develop concrete machinery electrical control systems, concrete pumping cylinders, pistons, glasses, plates, high pressure elbow, etc. this is also an important force in the transformation and upgrading.

     Finally, we need innovative mechanisms to alter the structure of key personnel. Currently, most enterprises are studied mechanical engineering technicians, electrical hydraulic, process, welding and other origin, accounting for almost 95%, and engage in digital, networked, intelligent people rarely. But no digital components, it can not build a computer, but also able to fulfill the information. So, visionary entrepreneurs should adjust the personnel structure, the introduction of a large number of software out, engage chip talent. Currently, India is one of the most developed countries of the world chip production, if not their own chips, China forever Suanbu Le powers on the concrete machinery.

2014年11月23日星期日

Construction waste recycling rate increase mobile crushing station to show their skills

The rapid development of industrialization, rapid population growth today, a series of environmental problems attendant to highlight the growing, weak awareness of environmental protection in the past, and now, fog and haze, water pollution, soil contamination and other issues turns on stage, prompting more and more the environmental issues were a top priority, all regions have to promote green economy, circular economy. China's rapid economic development in the moment, the growing number of construction waste is to stimulate the culprit of environmental degradation, how to get a reasonable solution to the problem of construction waste is imperative.

In the past, our widely used landfill, stacking approach to consume a large amount of construction machinery, this backward approach over time to create a series of negative ecological impacts but also caused a huge waste of resources, facts on construction waste recycling is not only related to environmental issues, which also bears enormous economic wealth. Part of construction waste in the waste through sorting, after removing or crushed, most of which can be reused. The emergence of mobile crushing plant found a sanctuary for construction waste, and promote China's economic development cycle.

Package of mobile crushing station equipment consists of crushers levels and shaker, feeder, conveyor and ancillary facilities and other components, including all kinds of auxiliary equipment, such as a separator, dust removal equipment. Mobile crushing plant flexibility, applicability, breaking the geographical restrictions, in any complex environment can achieve efficient operations, productivity has increased steadily. Promote the construction waste utilization, achieve economic and environmental benefits bi development is the development direction of China's future

2014年11月21日星期五

2014 Shanghai bauma Exhibition XCMG New Behind the Scenes

To "high-end leads to Green World" as the theme of 2014 XCMG new products and technology conference, will be held in Shanghai bauma Exhibition staged outdoor exhibition booth XCMG November 25, 2014. The conference is XCMG around international, world-class enterprise vision, in the "three high and one big" (high-tech, high value-added, high reliability, large-tonnage) product innovation strategic guidance, change management concepts and development ideas, increase technological innovation and high-end leads and vigorously pursue lower quality cost-effective situation at the scale of the development goals.

The past two years, XCMG forward to lead the development and building global technology, manufacturing, core supply chain, industrial four green highlands, marketing network all over the world, to lay the foundation for XCMG strategy of international development, developed a number of major resource-saving and environment friendly new equipment. Conference, XCMG will first release the latest, most new products, new technology, and complete solutions represent XCMG world's top high-end brand positioning and product requirements. Topic is intended to reveal XCMG stations worldwide, green and sustainable development of the whole society perspective, in huge accumulation of technology accumulation and results, based on the world's highest level of product development occupies a high point on the positive direction of the dominant industry of green energy technologies,

The conference released products include: XCMG continue to create the world's highly engineering lifting machinery, the challenge of global large and complete sets of mining machinery demand, as well as concrete machinery has a number of international leading technology and so on, where not only the "Everest board top "of high-tech products, but also to meet market demand

2014年11月17日星期一

How elevated tower crane

Tower Crane 
Crane referred tower crane, tower crane technical terms, also known as tower cranes. Is now essential for transportation and logistics as well as engineering and construction of a building machinery, so far, one hundred years of history. Because of tower cranes far looks like a tower, so it has become a way of increasing people interested in the topic.
In fact, the crane can be divided according to function: the balance arm, boom, foundation, tower, lifting, turning, lifting, lifting trolley, tower, cab, luffing and other parts of the building when the first tower crane should be a fundamental part of the installation. That is to determine the location of the tower crane erection, to determine the principles to be able to maximize the capacity of the tower crane construction machinery, easy entry and exit and tower crane installation and removal. Then select the appropriate foundation type. Weights and concrete foundation should be produced in advance and reach numerals not less than the foundation ground endurance 20T per square meter. On this basis, then they assembled on the chassis and the standard section.
Tower crane standard section is the main part constitutes the main part of the tower crane, tower crane height is heightening the main "character." During the construction process, along with the rise of the building crane, naturally, requires heightened. When heightening crane, with a lifting frame will be set up heightening frame, which stand between the tower and set aside space, standard section and then the tower is installed in this space inside. This will achieve the elevated tower crane purposes.

2014年11月11日星期二

Mixing and pumping are completed by one operator.

Mixing and pumping are completed by one operator. Boom movements are controlled by radio remote controller. Reduce the labor and operate easily.
minxing boom pump

2014年11月7日星期五

Stout Hot Chocolate with Beer Whipped Cream


First, we need to address the fact that this is a thing. Chocolate beer is a spectacular, astounding, remarkable thing. Chocolate stouts need to be sought out, consumed, enjoyed  and shared. It’s chocolate beer. Liquid that goes into your glass doesn’t get better than that.

Don’t mess around with those 12-ounce little guys — grab yourself a bomber (that’s a large 22-ounce bottle) and break out the beer glassware. If you’re feeling hospitable, host a little beer and chocolate party. Grab several glasses of beer (chocolate stout, smoked chocolate porter, mole chili chocolate ale, chocolate pumpkin porter) and chocolate bars of various degrees, from white to dark, and see what you like best. You should end this chocolate soiree with some stout hot chocolate and dazzle all your friends.

And you should also invite me.

Stout Hot Chocolate With Stout Whipped Cream

Yield: 4 servings

For the hot chocolate:

2 cups heavy cream
1 cup milk
1 cup dark chocolate chips
12 ounces chocolate stout
3 tablespoons sugar (if desired)
For the whipped cream:

1 cup heavy cream
1/3 cup powdered sugar
2 tablespoons stout
Directions:

In a pan over medium-high heat, add the cream, milk and chocolate chips. Stir until melted, about 5 minutes.
Remove from heat and stir in the beer. Depending on your personal preference and the level of bitterness in the beer you used, taste and determine if you want it sweeter; add in the 2 tablespoons of sugar for a higher level of sweetness.
Return to heat and stir until desired temperature is reached (usually between 140 and 160 degrees Fahrenheit).
To make the whipped cream, add all the whipped cream ingredients to a stand mixer and whip on high until soft peaks form, about 3 minutes.
Serve the hot chocolate topped with whipped cream.

2014年11月4日星期二

How to distinguish the merits of small concrete tank truck

For how to distinguish the merits of the performance of small concrete pump truck tank, Xiao Bian today to share with you by summarizing the following points, hoping consumers want to buy concrete pump equipment can be summed up small series to help you get the Heart wishful quality assurance concrete truck mixer.
1 for a small concrete tank truck usually are made ​​of high quality manganese steel, barrel and blades are generally used 5MM thick steel plate, head used is 8MM thick steel plate.
Although for the average consumer is unable to distinguish their quality steel, but we can observe about the plate thickness before buying the tank, if there is a problem mainly the plate thickness, then this is definitely not the car to buy. 2 For regular small concrete pump truck manufacturer, automatic welding tank vehicles are used for welding, the weld should be relatively uniform and is smooth, if found to also use traditional manual soldering or welding tanks and relatively rough, so certainly noncompliant.

Crack crane rental business talent and loyalty dilemma

In the tower crane rental companies on talent and loyalty to what is good or bad, after our priorities, the pros and cons of the topic, filling in the ear. As long as you are a crane industry professionals, willing to open this dialogue box, you can listen to rattle distress or complain.
A crane boss said: "Talented those hard to find, virtuous incompetent villain, there can be no virtue without underpinning ......"
Crane boss said B said: "To be honest, a lot of talent this year, but the 'reliable talent' only sector with a really important, I only use my trusted people have a lot of professional managers who think they can turn things around is. the key to the company's success, in fact, not at all. there are many factors that cause success or failure, not one or two people, but the director is very important, so we have to take will not betray my people ah!. "
Crane owner of C, said: "In fact, many professional managers (can only) granted that eligibility old colleagues not positive enough, nothing innovative in fact, these people are often highly motivated, but the lack of soundness, especially when the company.! encounter difficulties when it Paipaipigu avoid. so, too long or with people who are more willing to work hard together with the company, when the opportunity arises, of course, loyal trustworthy person with it! "
Crane owner of D, said: "These people first arrive, capacity, although strong, the company also needs a cultural period of running, the performance did not show it, is still in the study period, the real task entrusted to take time ......."
Crane rental companies and loyalists can only have something to say, "can only", said: "You see people who spend all day pretending diligent, submissive way, not because of incompetence afraid to lose their jobs ...... these people of ability we have what, the boss does not reuse ...... ";" loyalty before ", said:" look at those who like a pretentious, know how to multi-point capability strengths to look down on people, I think he is still capable how long ....... "
Select "can only" or "loyalty" problem plaguing most of our crane rental companies, many of crane rental companies encounter a problem of development, a large reason is the internal crane personnel. Because of our lack of professional managers and credit environment, the relevant legal constraints system is not fully developed, leading crane rental business owners dare select external managers (crane talent can only) to enter. Old people start to follow the crane owner has been working hard, knowing each end of the day, experienced employee loyalty test, the crane is also highly trust their boss, so crane rental entrepreneurs in this situation are more willing to choose credible persons involved in the operation. Construction machinery industry generally popular saying, "loyalty more important than ability" to say that this is a kind of helpless.
Crane rental companies at the beginning of the rise of China and also the era of rapid economic development, a number of crane rental companies with crane rental business, aimed vacancy market, to be successful quickly. But step into the 21st century, China's economy has entered a buyer's market, the arrival of low-profit era led to intense market competition, business slightest mistake is likely to lead to a comprehensive defeat. Living environment and rules of survival crane rental companies the ability to guide the transition from the opportunity to guide, which requires companies to complete management experience to the scientific management of change, the need to quickly implement from regional to national, from a single service to diverse businesses, from family businesses to modern enterprise, spanning from centralized governance to a number of decentralized governance, but not exactly the same across time and again its commitment to this entrepreneurial talent crane and tower crane rental companies require first-time entrepreneurs.
With the rapidly changing business environment, crane rental companies to compete effectively respond to the urgent need for the introduction of professional managers (can only) to improve the existing crane personnel structure. In this case "can only" and "loyalty only" meet, this conflict has occurred. Careful analysis of this topic, actually it contains two angles, one crane rental companies in the use of an employee's time, two qualities "can" and "loyalty" how trade-offs - the pros and cons, what good or bad, after our priorities; two is two kinds of people - "can only" and "loyalty was" How to use the same equipment trader and coexistence, with the crane owner as appointing party involved, the issue becomes more complex.
Faced with this conflict, crane rental companies how to do to better resolve conflicts personnel conflicts, allow enterprises to quickly adapt to the business environment we develop recommendations to address the following three aspects?:
(1) clarify the understanding - reasonable loyalty, interactive training, and grow together
Growth is the basis for the establishment of a common loyalty. Crane rental entrepreneurs should establish a correct concept of loyalty, loyalty to fully understand each other, but also to improve interaction. From an economic point of view and perspective of staff development, earnestly implement the commitment of every employee to create conditions to train people, erection stage training people to recognize only built on the basis of loyalty to the common growth is strong and durable. Do not attempt to use the so-called one-way loyalty

2014年11月3日星期一

9 without qualification concrete mixing station is being investigated

Without qualification concrete Batch Plant will have nowhere to go in Beijing. This year, the city of Housing and Urban Construction Committee has organized a ready-mixed concrete production and use special law enforcement inspection, which was recently on the nine non-qualified concrete companies were investigated.
According to reports, the focus of the special law enforcement inspection is for affordable housing, owner-occupied housing, rail transportation and other livelihood projects to supply concrete business. Check the overall situation is better, but also found by checking the existence of some companies of illegal behavior. For serious cases of illegal business, will limit the law to stop its bidding, cleared Beijing construction market.
No qualification supply concrete nine companies are: Beijing is China Concrete Co. substation Changziying Town, Daxing District, Beijing Zhenghua Concrete Co. yufa Branch, Beijing is China Concrete Co. zhuzhuang Branch, Beijing Tiger Leap concrete Limited sub-station, China Railway construction Group Co., commodity concrete Branch sub-station, Beijing Urbano concrete Co. substation, Beijing Hongxin ready-mixed mortar concrete Co. sub-stations, the Beijing Tianzhu concrete Co., Ltd. Li Sui town sub-stations, Beijing SIA Building Materials Group Co., Ltd. Qinglong sub-station.

Raw materials sampling failed Beijing Fu Hua Yu Concrete Co., Ltd. Beijing Qiushi concrete on file punishment; for China Construction Bureau (Group) Co., Ltd., Beijing Construction Engineering Group Co., Ltd. Jintan, limited Beijing Fu Hua Yu concrete three companies of ready-mixed concrete companies did not conduct tests were conducted directly responsible for filing penalties and fines; concrete under laboratory does not meet the special laboratory standards in Beijing Ze Tianyu concrete Co. issued a notice to make corrections; complexes ratio does not meet the standard requirements of Beijing Jinpeng concrete Co., ordered to immediately stop using the mix of production, and the mix of expert argumentation and entities involved in engineering structures were detected.
Recent inspection found himself "Beijing is China Concrete Co. Changziying Town, Daxing District, sub-stations," the site, the actual production of concrete materials to the construction unit dosage and mixing ratio of the amount of discrepancies, allegedly cut corners, at present, Municipal Construction Committee has their behavior a criminal investigation; at the same time, its illegal production and supply of ready-mixed concrete actions, on suspicion of a crime, will be transferred to public security organs according to law.
Quality is related to the structural safety of ready-mixed concrete works, in what stage work, combined with the city Housing and Urban Construction machinery Commission to implement the national Department of Housing and Urban Construction Engineering Quality Control spiritual action for two years, to develop a "Beijing ready mixed concrete production and use of quality special treatment two year program of action "to continue to focus time to carry out specific work, and resolutely investigate and deal with non-qualified or corporate lease, lend other forms of illegal transfer of business qualification certificate of the enterprise, illegal enterprises to restrict the circumstances are serious, stop its bidding until was cleared Beijing construction market, ensure the quality of ready-mixed concrete. At the same time, increase efforts to inform the exposure, accept social supervision.